PRODUCTS
PRODUCTS

Calipri C42 Railway Profiler

Calipri non-contact profile measurement devices meet the demands of the railway industry for a simple measurement device with reproducible results for the complete wheel-rail-system. The CALIPRI C4X series stands for multifunctionality across the board. The different measurement modules allow different measurement tasks with just one testing device and therefore no longer have to switch between measurement devices in the workshop pit or on the rails.

The relevant measurement plan is created using the Calipri Manager software. The person responsible defines the sequence of measuring points, the evaluation method, as well as parameters and tolerances. Measurement plans created in this way can than simply be distributed to all sites.

The measurement is subsequently carried out on the individual measuring points in the defined sequence with a swiveling motion of the sensor. The patented Calipri principle automatically corrects tilts and rotations of the sensor. The Calipri Portable Operator measurement software subsequently evaluates the measured profile and calculates the measured values. These values are displayed to the user on the tablet PC and the sensor display and are compared to predefined limit values. A traffic-light system indicates if these limit values are not met or exceeded. Finally, the measured data can be printed as a report or exported as a data set and transferred to existing databases – on request, fully automatically via standard interfaces and customer-specific solutions.

Rolling Stock Application: Wheel Profile(Height, Width, qR), Tire Thickness, Wheel Diameter, Back-to-Back, Brake Disk, Equivalent Conicity, Defects, Radial/Axial Runout

Infrastructure: Rail, Switch, Track Geometry


 

Dimensions: 64 x 63 x 164 mm | 2.51 x 2.48 x 6.46 inch

Weight: 590 g | 20.81 oz

Display(Sensor): 2.2-inch TFT LCD

Laser(Sensor): 660 nm, class 2M

Degree of protection: IP54

Battery Life: > 4h

Absolute accuracy: < ±80 μm

Repeat accuracy: < ±35 μm